The Dodo Blog

Hi!

Here’s the third part of my answer to your question:

“What are resists and how do you use them?”

If you haven’t watched parts I and II, go and check them out. You can find the links below.

SO WHAT ELSE SHOULD YOU CONSIDER WHEN DESIGNING A RESIST?

You probably already know that wool can actually shrink a lot when wet felted, right?

Like even 30 or 40%, depending on the wool type and how thick your layers are or how you lay the fibers.

So, when designing a resist, you have to plan for this shrinkage.

If you’re making a bag or any other object where the size doesn’t have to be very precise, you can make your resist and start felting.

But if you want to make a hat or a pair of shoes, then you want to get the RIGHT size, right?

In that case, start by making a sample with the wool you’ll be working with and lay it in the way and with the thickness you’re planning for your piece.

From this sample you can see how much the wool shrinks, so...

Hi!

Today I’m here with the second part of my answer to your question:

“What are resists and how do you use them?”

If you haven’t watched part I, go and check it out. You can find the link below.

SO WHAT MATERIALS CAN WE USE FOR A RESIST?

One of the most important things when using a resist is the CHOICE OF MATERIALS.

It has to be something that doesn’t felt onto wool, otherwise it’ll remain stuck between the layers, instead of doing its job, which is to SEPARATE them.

It should also be flexible enough to work with.

The 3 main materials used are cardboard, thin plastic and floor underlayment.

CARDBOARD is not something I use, because we work with water, so you can only use it once. It’s also not very malleable, so it’s a bit hard to work with.

THIN PLASTIC is something I use sometimes. It’s malleable but it’s hard to feel through a thick piece of felt. So, I only use it when I’m felting thin pieces.

FLOOR UNDERLAYMENT...

Hi!

Today I’m answering another one of your questions.

Now, I’ve done a couple of videos about resists, but I keep getting questions about them. Because this is such a big and important topic, I keep answering them.

Speaking of which, here’s the question for today:

“What are resists and how do you use them?”

Now, this question is very likely from someone who’s starting with wet felting and wanting to improve the technique. And this is in fact, one of the most important things to understand.

As I’ve mentioned before, I do have a couple of videos about resists, but I don’t think I explain what they are in any of them.

So, that’s what I’m going to do today.

SO, WHAT IS A RESIST?

By definition, a RESIST is anything you use between two pieces of wool to avoid that they felt with each other.

A resist is only used DURING the felting process and it’s removed after the process is complete. Or rather, before you start fulling.

Hi!

As you might know, I’ve been asking you to send me the biggest questions you have on wet felting. I’ve received a bunch of them and I’ll be working on the different topics in the next weeks.

Some of them are great for the free videos and I got suggestions for new courses as well. So, thank you again!

I’m going to start with the ones that are common problems to a lot of people. Today I have a great topic.

I don’t know who it’s from because it came from an anonymous survey. But it’s definitely a common one. And the question is

“How important is the thickness of the fiber layers when making something like mitts? Is it better to do thin or thick pieces?”

No matter if we’re talking about mitts, clothes, hats or bags, my answer to this question would ALWAYS be the same.

FIRST – YOU decide on how thick you want your piece to be.

This will depend on

a) the type of climate you’re making it for

b) how stiff or soft do...

Hi!

For those of you who are on my email list, I sent you an email with a link to a survey last week. It’s very short. Just one question.

I’ve been getting a lot of replies. So, first of all, thank you for your answers.

Now, you might be asking what’s the point of this. Well, as I said at the beginning of this year, I want to make a couple of changes to this whole project.

I created GTDW about 2 years ago and I’ve just been making videos and writing blog posts according to what I think might be useful and interesting to you. But, at the end of the day, I’m just guessing.

Now, I’d like to do more than just guess and the only way to do that is by asking you what you want.

So, if you haven’t answered yet, please take a look at the email I sent you last week.

And, if you’re not on my email list, subscribe now. You only have to fill in your name and email address.

Another way to answer my one question survey and let me know what you’d...

Today I bring you a new workshop. After being asked for more PDF tutorials, I am now creating some of the ones I had on video in a printable version.

This one is about play food and it’s based on a video course I launched last October. You can watch a video about the course here and check out some free videos on the included material here.

With over 140 pages and hundreds of detailed color photos, the PDF tutorial covers citrus fruits (oranges, mandarins and lemons) and berries (cherries, strawberries, blackberries and mulberries), and it includes:

0. Introduction
1. Materials and equipment
2. Making the pre-felts
3. Using leftovers to fill new felt pieces
4. Oranges, mandarins and lemons
5. Strawberries, cherries, blackberries and mulberries
• Leaf templates (1 PDF)
• Bonus: Basics of wet and needle felting (1 PDF)

This is a beginner level tutorial, so you don’t need to have any experience in wet felting. The bonus PDF gives you all the basics and has links to...

Today I’ve got a fun tutorial that shows you how to wet felt a ball necklace for children. It’s called Kid’s Dots, and it’s a piece I’ve sold for a long time. Now you get to see how it’s done (for FREE)

I decided to film this project because Stacy Tavassoli from Truly Majestic invited me to create a tutorial for her arm knitting community. Arm knitting is done with big amounts of wool roving, the same we use for wet felting. But it produces lots of scraps that you can’t use for knitting any more.

So here it is for you. It’s an easy tutorial, which is great for beginners. You won’t need much equipment. Actually, you probably have everything you need at home already. And it shows you 10 tips that are useful for other felting projects.

I’d love to see how your necklaces turned out, so click here to send me your photos

Have fun!

P.S.: The special Mother’s Day Pack is a 2 for 1 pack for crafty moms, that is only...